High-Resolution Low-Sidelobe Waveform Design Based on HFPFM Coding Model for SAR.

Radar waveform design is an important approach to radar system performance enhancement. For a long time, synthetic aperture radar (SAR) systems have utilized linear frequency modulation (LFM) waveforms as transmitted signals and have relied on window functions to suppress sidelobes. However, this approach significantly degrades system signal-to-noise ratio (SNR) and resolution. Nonlinear frequency modulation (NLFM) waveforms can suppress sidelobes without SNR loss and have been widely applied in the SAR field in recent years. Nonetheless, they still cannot completely avoid resolution loss. To address this, this article, based on an advanced High-Freedom Parameterized Frequency Modulation (HFPFM) coding model, constructs a waveform sidelobe optimization model constrained by mainlobe widening and solves it using a gradient descent method. Through detailed experiments, we found that the optimized waveform, compared to the LFM waveform, can reduce sidelobes by more than 9 dB without widening the mainlobe, thereby simultaneously avoiding the resolution and SNR losses caused by window function weighting. In addition, this optimization method can efficiently and rapidly optimize all parameters simultaneously using only matrix multiplication and fast Fourier transform (FFT)/inverse fast Fourier transform (IFFT). The SAR point target imaging simulation results verify that the optimized waveform can clearly image weak targets near strong targets, which proves the effectiveness of the proposed method.