Comprehensive Investigation of Iron Salt Effects on Membrane Bioreactor from Perspective of Controlling Iron Leakage.

Although adding iron salts can improve phosphorus removal in membrane bioreactor (MBR) processes, overdosing iron salts may result in excessive iron concentrations in the effluent and pose risks of surface water contamination. In this study, an optimized iron salt dosing method was proposed to comprehensively investigate its effects on the performance of MBRs and the control of iron leakage. The results showed that batch dosing of solid iron salts (Fe2(SO4)3) into the influent or activated sludge maintained an effluent Fe3+ concentration below 1.0 mg/L and a total phosphorus (TP) concentration below 0.30 mg/L. Long-term operation of the MBR (under conditions of HRT = 4.3 h, SRT = 20 d, and MLSS = 12 g/L) showed that batch dosing of solid iron salts led to an increase in the effluent ammonia-nitrogen (NH3-N) concentration, and the nitrification effect was restored after supplementing the alkalinity. Iron salts increased the TP removal rate by approximately 40% while inhibiting the biological phosphorus removal capacity. The average Fe3+ concentration in the membrane effluent (0.23 ± 0.11 mg/L) met China's Environmental Quality Standard for Surface Water (GB3838-2002). This study demonstrates that batch dosing of solid iron salts effectively controls iron concentration in the MBR effluent while preventing secondary pollution. The mechanisms of the impact of iron salts on MBR performance provide crucial theoretical and technical support for MBR process optimization.