Influence of Simulated Radioactive Waste Resins on the Properties of Magnesium Silicate Hydrate Cement.

Ion exchange resins are commonly utilized for treating liquid radioactive waste within nuclear power plants; however, the disposal of these waste resins presents a new challenge. In this study, magnesium silicate hydrate cement (MSHC) was used to immobilize the waste resin, and the immobilization effectiveness of the MSHC-solidified body were assessed by mechanical properties, durability, and leaching performance. Hydration heat, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electronic microscopy (SEM), and mercury intrusion porosimetry (MIP) were used to study the hydration process of the MSHC-solidified body containing Cs+, Sr2+, and Cs+/Sr2+ waste resins. The results demonstrated that the presence of waste resins slightly delayed the hydration reaction process of MSHC and reduced the polymerization degree of the M-S-H gel, and the composition of the hydration products were not changed. The immobilization mechanism for radionuclide ions in resin included both mechanical encapsulation and surface adsorption, and the leaching of Cs+ and Sr2+ from MSHC-solidified body followed the FRDIM. When the content of the waste resin was 25%, the MSHC-solidified body exhibited satisfactory compressive strength, freeze-thaw resistance, soaking resistance, and impact resistance. These results strongly indicated that MSHC possessed the ability to effectively immobilize ion exchange resins.