Laser diagnostic investigation on flame-assisted spray synthesis of NMC811 battery materials.

There is significant interest in the development of robust and simplified processes for the production of battery materials, including Li(Ni[Formula: see text]Mn[Formula: see text]Co[Formula: see text])O[Formula: see text] (NMC811), which has demonstrated high energy capacity, thermal stability and excellent electrical conductivity. This study developed a flat-flame reactor to provide a flame environment for flame spray pyrolysis (FSP), starting from an aerosolised solution of a mixture of metal nitrates in water. Preliminary studies were conducted to confirm that the operating conditions produced suitable NMC materials with acceptable performance after annealing at 750 [Formula: see text]C. Multiple laser diagnostic techniques were applied to characterise the spatial distribution of reactants and products and capture the process of reaction. Phase Doppler particle analysis was used to capture the droplet characteristics of precursors, and Mie scattering was used to map the instantaneous spatial distribution of droplets. A range of excitation wavelengths was tested to detect the participating species. However, only the high-energy wavelengths below 400 nm were capable of eliciting any signal. Light from a 355 nm pulsed laser was used to excite phase-selective laser-induced breakdown spectroscopy (PS-LIBS) to characterise the spatial distribution of the synthesised particles arising from mixing and reaction in the high temperature zone. The excited emission from the reaction zone was spectrally characterised, as was the corresponding time signature. Finally, simultaneous Mie scattering and PS-LIBS images were obtained to capture both droplet and synthesised particle distribution, capturing the emerging reaction process. The studies show, for the first time, how emissions from the formed particles can be used as a surrogate for the progress of reaction in similar FSP systems.